aluval continuing with the extension of products in its catalog and the development of new solutions according to the needs of the market and always seeking excellence in all products, presents the corner solution for curtain walls in its tape and version version.
this new solution comes to meet the needs more and more demanded in the new current buildings. the solution is presented in a single profile for both versions of curtain wall.
the curtain wall structural system of the aluprom 54 series is a system with the following characteristics of the curtain wall with mounts from 45mm to 200mm. with a width of studs of 54mm, cut in a straight and assembly through adjustable pieces and breaking the thermal bridge between inner and outside profiles by means of 6mm or 11mm epdm seal. like the system that i was already trading with tapetas.
the construction possibilities of the complete system are, glazing through epdm joints from 6mm to 65mm, wall of caps. compatible with practicable rpt and structural wall systems. the structural curtain wall with projecting leaves up to 2000x2000 and up to 200kg.
for the marketing of the previous system with covers and the new structural system, hardware with the following characteristics and solutions have been chosen. joint pieces in extruded aluminum and epdm seals, parallel projecting compasses from 350x750 to 2000x2000, sliding projecting compasses, motorization for parallel projecting openings and european body hardware hardware.
the test results of the aluprom 54 system are as follows
result in test bench: air, water and wind
air permeability
(une-en 1026: 2000)
class ae
water-tightness
(une-en 1027: 2000)
class r7
resistance to wind load
(une-en 12211: 2000)
suitable
tested dimensions: 3000x4000 mm
thermal transmission
horizontal section 4.7 w / m2k * / m2k * w / m2k)
vertical section 4 w / m2k *
determination of the coefficient of thermal transmission u (en iso 10077-2: 2003)
ucw full wall 2.12 w / m2k *
coefficient of thermal transmission for a wall of 3000x4000 mm. with a glazing 4-12-4 low emissivity + argon.
for any curtain wall project, each profile have indicated the moment of inertia of the same, for the calculation of the mill to place and the distance between mills.
if you have any questions, consult our technical department which will indicate you which is the most suitable solution.
aluval in its eagerness for constant improvement and delivery of products with the highest qualities to its customers is keeping in a constant search for the implementation of new technologies, machinery and productive systems so that the product that will always receive the customers that will always receive their customers. of excellence that they want.
so since the birth of the company more than 45 years ago this has been a constant that has been maintained as a philosophy within the company. always maintaining as the main premise that the most important asset we have is the ¨ human technology ¨.
since the beginning of the company's manufacturing operations, the company has always stand out for the search for new systems to improve the quality of the final product.
